DPM Series

DPM 1622 CFX

user manual images
Model DPM1622CFX
Mono Channels Microphone input: XLR with balanced
Frequency response: 10Hz to 20kHz, +/-3dB
Distortion (THD&N): <0.03% at +4dBu, 22Hz ~ 22kHz
Gain range: 0dB to 50dB
Max. input: +22 dB
SNR: <-100dB
Phantom power: +48V with switch control
Line input: 1/4' TRS with balanced
Frequency response: 10Hz-55KHz, +/-3 dB
Distortion(THD&N): <0.03% at +4dBu, 22Hz ~ 22kHz
Sensitivity range: +15dB~ -35dB
Stereo Input Channels Line input: 1/4' TRS with balanced
Frequency response: 10Hz-55KHz, +/-3 dB
Distortion (THD&N): <0.03% at +4dBu, 22Hz ~ 22kHz
Sensitivity range: +20dB~ -20dB
SNR: <-100dB
Impedances Microphone input: 3.6K Ohm
All other input: 10K Ohm or greater
Tape out: 1K Ohm
All other out: 120 Ohm
Channels EQ (mono) High: +/-15dB@12KHz
Mid: +/-15dB@8KHz~100Hz
Low: +/-15dB@80Hz
Channels EQ (stereo) High: +/-15dB@12KHz
Mid: +/-15dB@3KHz(for HI-MID);+/-15dB@500Hz(for LOW-MID)
Low: +/-15dB@80Hz
DSP Section A/D and D/A converters: 24bit
Controls: 100 position preset selector(10 preseter*10variation) / Mute switch & Foot-switching with LED indicator
Main Mix Section MAX. Output: +22dBU XLR balancec & 1/4' PHONES unbalanced
AUX range: OFF to +10dB
Fader range: OFF to +10dB
7 bands stereo EQ: +/-15dB @ 7bands (63,160,400,1K,2.5K,6.3KHz)
Main Mix COMP. Section Threshold range: -40dB~+20dB (type)
Comp./Lim.(Ratio) range:2:1 to 8:1(limit)
Hum & Noise: <-80dB @ 0dB 20Hz~22KHz,MAIN level:0dB,the other:minimum
Channel Crosstalk: <-80dB @ 20Hz~22KHz,1 channel &MAIN level:0dB,the other:minimum
Power Amp. Section Stereo mode: 2*500W @4ohm EIAJ / 2*270W @8ohm EIAJ
Bridged mode: 1000W @8ohm EIAJ / 520W @16ohm EIAJ
Power Supply Main voltage: 100-120VAC ~60Hz; 220-240VAC ~50Hz
Fuse: 115V:12A; 230V:6.3A
Physical Dimension( W*D*H): 63.1 x 54.6 x 22.8cm
Net weight: 12.5