DPM Series

DPM 1412 CFX

user manual images
Model DPM1412CFX
Mono Channels Microphone input: Electronically balanced, discrete input configuration
Frequency response: 20Hz to 22KHz, +/-3dB
Distortion (THD&N): 0.03% at 1KHz
Sensitivity: -40dBu
SNR: =92 dBu
PAD: -20dB
Phantom power: +48V with switch control
Line input: Electronically balanced
Frequency response: 20Hz to 22KHz, +/-3dB
Distortion(THD&N): 0.03% at 1KHz
Sensitivity range: -20dB
Stereo Channels Line input: Electronically balanced, discrete input configuration
Frequency response: 20Hz-55KHz, +/-3 dB
Distortion (THD&N): 0.01% at 1KHz
Sensitivity range: -40dBu
SNR: =92 dBu
Phantom power: +48V with switch control
Line input: Electronically balanced
Frequency response: 20Hz-22KHz, +/-3 dB
Distortion (THD&N): 0.03% at 1KHz
Sensitivity range: 0dBu
Impedances Microphone input: 1.4K Ohm
All other input: 10K Ohm or greater
Tape out: 1K Ohm
All other out: 120 Ohm
Channels EQ (mono) High: +/-15dB@12KHz
Mid: +/-12dB@2.5Hz
Low: +/-15dB@80Hz
Channels EQ (stereo) High: +/-15dB@12KHz
Mid: +/-12dB@2.5Hz
Low: +/-15dB@80Hz
DSP Section A/D and D/A converters: 24bit
DSP resolution: 24bit
Type of effects: VOCAL,SMALL++ ROOM,LARGE HALL,ECHO,ECHO+VERB / FLANGE+VERB,PLATE,CHORUS+GTR,ROTARY+GTR,TREMOLO+GTR
Presets: 100
Controls: 100 position preset selector(10 preseter*10variation) / Mute switch & Foot-switching with LED indicator
LAMP Pin2(+) and pin1(-): +12V DC/0.5A
Main Mix Section MAX. Output: 0dBu unbalanced, 1/4' jacks
Max output: +22dBu balanced/unbalanced. 1/4' jacks
Main, Monitor EQ: +/-15dB @ 7 bands(63,140,400,1K,2.5K,6.3K,16KHz)
Noise (BUS noise): =-70dB @ 200Hz~22KHz (channel & MAIN at 0dB, other at minimum, DSP mute)
Compressor Threshold: -40dB~+22dB
Comp./Lim.: Ratio (variable) 2:1 to 8:1(limit); attack Time: 1ms; release time: 2s
Power Section (1000W mode) Power continuous / 1KHz, THD 0.5%: 2*390W @4ohm / 2*240W @8ohm
Power EIAJ 1KHz, THD 1%: 2*500W @4ohm / 2*270W @8ohm
Bridged mode: 1000W @8ohm / 520W @16ohm
Protection Thermal protection: Over-temperature power limiting / Thermal shutdown
Short protection: Short-circuit protection / Overload output protection
Voltage protection (for THE T.MIX DPM 1064): Clip limiter / Permanent signal limiter
Limiter (for THE T.MIX DPM 1094): High frequency protection
Static PowerConsumption No output power State at 230V: =38W
Power Supply Main voltage: 100-120VAC ~60Hz; 220-240VAC ~50Hz
Physical Dimension( W*D*H): 55.1 x 48.2 x 22.8cm
Net weight: 9.83
BACK