TPM Series

TPM 7.800

tpm7800
user manual images
Model TPM7.800
Mono Channels
Microphone InputElectronically Balanced, discrete input configuration
Frequency Response20Hz to 220KHz, ± 3dB
Distortion (THD/N)0.1% at 1KHz
Sensitivity -40dBu
SNR=-80dBu
PAD -20dB
Phantom Power +15V with switch control
Line inputElectronically Balanced
Frequency Response20Hz - 22KHz ± 3dB
Distortion (THD/N)0.1% at 1KHz
Sensitivity range -20dBu
Stereo Channels
Line inputElectronically Balanced, discrete input configuration
Frequency Response20Hz - 55KHz ± 3dB
Distortion (THD/N)0.1% at 1KHz
Sensitivity range -40dBu
SNR=-80dBu
Phantom Power +15V with switch control
Line inputElectronically balanced
Frequency Response20Hz - 22KHz ± 3dB
Distortion (THD/N)0.1% at 1KHz
Sensitivity range0dBu
Impedances
Microphone Input1.4K Ohm
All other input10K Ohm
Tape Out1k Ohm
All other Out120 Ohmios
Channels EQ (mono)
High±15dB @ 12Khz
Mid±12dB @ 2.5Khz
Low±15dB @ 80Khz
Channels EQ (stereo)
High±15dB @ 12Khz
Mid±12dB @ 2.5Khz
Low±15dB @ 80Khz
DSP Section
A/D and D/A Converters24 Bit
DSP resolution24 Bit
Type of effectsVocal, Small Room, Large Hall, Echo, Echo+Verb, Flanger, +Verb, Plate, Chorus+GTR, Rotary+GTR, Tremolo+GTR
Preset100
Controls100 position preset selector (10 preset x 10 variations)
Mute switch with LED indicator, CLIP LED
Lamp
Pin2 (+) y Pin1 (-) +12V DC 0.5A
Main Mix Section
Main, Aux, output0dB unbalanced, 1/4" connectors
Main, Monitor EQ±15dB@7 Bands (63,160,400,1K,2.6K,6.3K,16KHz)
Noise (BUS Noise)= -70dB @ 20KHz ~ 22KHz (channel & MAIN level at 0dB, other at minimum, DSP mute)
Compressor
Threshold -40dB ~ +22dB
Comp. / Lim.Ratio (variable) 2:1 to 8: 1(Limit); attack Time: 1ms; release time: 2s
Power Section(800 W mode)
Power continuous 1KHz, THD 0.5%2 x 2300W @ 4 Ohm
2 x 150W @ 8 Ohm
EIAJ 1KHz, THD 1%2 x 400W @ 4 Ohm
Bridge mode800W @ 8 Ohm EIAJ
440W @ 8 Ohm RMS
Protection
Thermal ProtectionOver-temperature power limiting
Thermal shutdown
Temperature controlled 24V DC fan output
Short protectionShort-circuit protection
Overload output protection
LimiterClip limiter
Permanent signal limiter
High Frequency Protection
Static Power Consumption
No output power State at 230V35W
Power Supply
Main voltage100 - 120VAC 60Hz
220 - 240VAC 50Hz
100 - 120V: T 12A 250V FUSIBLE
210 - 240V: T 6.3A 250V FUSIBLE
Physical
Dimension (W x D x H)581 x 280 x 274 mm
WeightNW: 14.3 Kg      GW: 17.5 Kg
BACK