VA Series

VA42.12

va42.12
user manual images
Passive Speaker VA42BM
System Type 3.5" Passive Speaker System
Output Power 120W Continuous, 240W Program, 480W Peak
Sensitivity (1W/1M) 95dB
Maximum SPL @ 1m 122dB Max. (calculated)
Frequency Response (-6dB) 160Hz-20kHz
Impedance 8 ohms
Transducer Low 4 x 3.5'' Woofer, 1'' (25.4mm) Voice Coil
Crossover Frequency 500Hz
Dispersion (-6dB) 100° Horizontal
Attachment Points Adjustable Rigging System, Horizontal Splay Rotation in -90°-0°- 90° Increments from 180°
Enclosure Construction Plywood Cabinet, Resistant Paint, Metal Grille with Foam
Mounting 2 x Holder, 1 x Input Connector for VA-WP Pole, Another with Input Connector for VA42TP
Dimensions (HxWxD) 448 x 106.6 x 98mm (17.64'' x 4.20'' x 3.86'')
Net Weight 3.48Kg (7.67 Ibs)
Passive Speaker VA42TP
System Type 3.5" Passive Speaker System
Output Power 120W Continuous, 240W Program, 480W Peak
Sensitivity (1W/1M) 95dB
Maximum SPL @ 1m 122dB Max.(calculated)
Frequency Response (-6dB) 160Hz-20kHz
Impedance 8 ohms
Transducer Low 4 x 3.5'' Woofer , 1'' (25.4mm) Voice Coil
Crossover Frequency 500Hz
Dispersion (-6dB) 100° Horizontal
Attachment Points Adjustable Rigging System, Horizontal Splay Rotation in -90°-0°- 90° Increments from 180°
Enclosure Construction Plywood Cabinet, Resistant Paint, Metal Grille with Foam
Mounting 1 x Holder, 1 x Input Connector for VA-42BM or VA-WP Pole
Dimensions (HxWxD) 422 x 106.6 x 98mm (16.61'' x 4.20'' x 3.86'')
Net Weight 3.41Kg (7.52 Ibs)
Active Subwoofer VA12SA
System Type 12" Active Subwwofer Apeaker Cabinet
Frequency response -6 dB 40Hz-500Hz
Total amplifier power 1000W Continuous/2000W Program/4000W Peak Class D @ 4 Ohms
Amplifier, subwoofer 500W Continuous / 1000W Program / 2000W Peak Class-D @ 4ohms
Amplifier, satellite / mid / high unit 500W Continuous / 1000W Program / 2000W Peak Class-D @ 4ohms
Sensitivity (1W@1m) 96dB
Maximum SPL@1m 130dB (Calculated)
Electronic Protections Over heat Protection / Short Circuit Protection / Digital Compressor
Cooling Temperature-controlled fan
Connections Input: 2 Combo-XLR & 1/4", RCA In L & R, 1 XLR Thru & Mix out
External Controls Volume Control / Switch for Input sens. / Swtich for mode selector / Power ON with Green LED / Limiter with Red LED / Ground Lift / IP Control
Power Supply 110V/230V -50/60Hz
Enclosure Construction Plywood cabinet, resistant black paint, metal grille with foam, rubber feet, handles
Mounting Holder with Input Jacks for Pole
Dimensions (W x H x D) 430 x 450 x 480 mm (16.93" x 17.72" x 18.90")
Net Weight 20.51 kg / 45.22 lbs.
Pole VA-WP
Enclosure Construction Plywood Cabinet, Resistant Paint, Metal Grille with Foam
Mounting 2 x Holder, 1 x Input Connector for Sub, Another with Input Connector for Satellite
Dimensions (WxHxD) 700 x 106.6 x 98mm (27.56'' x 4.20'' x 3.86'')
Net Weight 2.70Kg (5.95 Ibs)
BACK