Powered Mixers
| TPM6300 USB & TPM8300 USB Specifications | |||
| Type | TPM series | ||
| Input channels | Microphone input | electronically balanced, discrete Input configuration | |
| Frequency response | 20Hz to 20KHz,+/-3dB | ||
| Gain | 50dB | ||
| Line input | electronically balanced | ||
| Frequency response | 20Hz to 20KHz,+/-3dB | ||
| Gain | 20dB | ||
| Impedances | Microphone input | 1.5 kOhm | |
| All other input | 10 kOhm or greater | ||
| Tape out | 1 kOhm | ||
| All other output | 120 Ohm | ||
| Equalization | Hi | +/-15dB@12KHz | |
| Mid | +/-12dB@2.5KHz | ||
| Low | +/-15dB@80Hz | ||
| Graphic EQ | 7-Band, 4/3octave | ||
| DSP Section | A/D and D/A converters | 24 Bit | |
| Dsp resolution | 24 Bit | ||
| Type of effects | Vocal, Small Room, Large Hall, Echo, Echo+Verb, Flange+Verb, Plate, Chorus+GTR, Rotary+GTR, Tremolo+GTR |
||
| Presets | 100 | ||
| Controls | 100-Position PRESET selector, Chip LED, MUTE SWITCH with LED indicator | ||
| Main mixer Section | Monitor Max out | +22dBu unbalanced, 1/4''jacks | |
| Fx Sends Max out | +22dBu unbalanced, 1/4''jacks | ||
| THD | THD＜0.5% at 1Watt Output Power ; THD≦1% at 250 Watt Output Power | ||
| S/N | SNR(signal to noise ratio) set Output Line to 1KHz | >65dB | |
| Static Power Consumption | No Output Power state at 230V | ＜50W | |
| Power Amplifier section | Output Power | 250W RMS at 1kHz THD=1%, Load=4Ω | |
| Frequency response | 20Hz to 20KHz, +/-3dB | ||
| Power Source | 220~240V/110~127V~50/60Hz | ||
| Physical | Dimension | TPM6300USB | 483*265*256mm (19.0''×10.4''×10.0'') |
| TPM8300USB | 540*265*256mm (21.3''×10.4''×10.0'') | ||
| Net Weight | TPM6300USB | 10.6Kg (23.4lbs) | |
| TPM8300USB | 10.9Kg (24.0lbs) | ||
| TPM9800 USB Specifications | |||
| Type | TPM series | ||
| Input channels | Microphone input | electronically balanced, discrete Input configuration | |
| Frequency response | 20Hz to 20KHz,+/-3dB | ||
| Gain | 50dB | ||
| Line input | electronically balanced | ||
| Frequency response | 20Hz to 20KHz,+/-3dB | ||
| Gain | 20dB | ||
| Impedances | Microphone input | 1.5 kOhm | |
| All other input | 10 kOhm or greater | ||
| Tape out | 1 kOhm | ||
| All other output | 120 Ohm | ||
| Equalization | Hi | +/-15dB@12KHz | |
| Mid | +/-12dB@2.5KHz | ||
| Low | +/-15dB@80Hz | ||
| Graphic EQ | 2 x 7 Band, 4/3 octave | ||
| DSP Section | A/D and D/A converters | 24 Bit | |
| Dsp resolution | 24 Bit | ||
| Type of effects | Vocal, Small Room, Large Hall, Echo, Echo+Verb, Flange+Verb, Plate, Chorus+GTR, Rotary+GTR, Tremolo+GTR |
||
| Presets | 100 | ||
| Controls | 100-Position PRESET selector, Chip LED, MUTE SWITCH with LED indicator |
||
| Main mixer Section | Monitor Max out | +22dBu unbalanced, 1/4'' jacks | |
| Fx Sends Max out | +22dBu unbalanced, 1/4'' jacks | ||
| THD | THD＜0.5% at 1Watt Output Power; THD≦1% at 250 Watt Output Power | ||
| S/N | SNR (signal to noise ratio) set Output Line to 1KHz | >65dB | |
| Static Power Consumption | No Output Power state at 230V | ＜50W | |
| Power Amplifier section | Output Power | 500 Watts, Load=4Ω per channel / 1000 Watts, “Bridge” Mode, Load=4Ω |
|
| Frequency response | 20Hz to 20KHz, +/-3dB | ||
| Power Source | 220~240V / 110~127V ~ 50 / 60Hz | ||
| MP3 Section
(only for TPM6300 USB TPM8300 USB & TPM9800 USB) |
USB HOST | Builds in the USB FULL speed(12Mbps) HOST control function |
| Supports the USB mass storage class | ||
| FAT analysis | Supports FAT16 and FAT32 Supports VFAT(long file name) Supports multi-partition up to 1 |
|
| MP3 DECODE | Supports sample rates 8KHz, 16KHz, 32KHz, 11.025KHz, 22.05KHz, 44.1KHz, 12KHz, 24KHz and 48KHz. | |
| Electric Specification |
Supports bit rate 8 to 320 kbps and VBR (Variable Bit Rate) except free format | |
| Frequency response: 20Hz~20KHz | ||
| S/N Ratio: >90 dB | ||
| Distortion (at 1 KHz): <0.04% |
TPM SERIES
TPM6300 USB
TPM8300 USB
TPM9800 USB
Documents
TPM /6300 / 8300 USB User´s Manual
TPM9800 USB
HI-RES Images
TPM6300 USB
TPM8300 USB
TPM9800 USB
