LEGACY MODELS
S-ARRAY
S-ARRAY
SMART-ARRAY
Back
| Model | TPS i28H |
| System | 2-Way Vented Cabinet |
| Continuous Power | 200 Watts |
| Program Power | 400 Watts |
| Speaker Sensitivity | 95dB SPL ±3dB / Max SPL: 121dB at 1m |
| Frequency Response | 65Hz~20kHz (-6dB) |
| Impedance | 8 Ohms |
| Crossover Frequency | 3.2 KHz |
| Woofer | 2 x 8" - 1.5" V.C. |
| Horn Coverage: | 50º x 50º |
| Driver: High frequency: | 1", Driver - 1" Voice Coil |
| Connectors: | 2 x SPK4 / 2 x NL4 in TPS i210H |
| Protection: | High Frequency Protection |
| Dimension (cm) | 37.8 x 33.9 x 73.1 |
| Weight (kg) | 16.8 |
| Model: | TPS i28HA |
| System | Bi-Amp |
| Continuous Power | Low: 180W / High: 25W |
| Program Power | Low: 360W / High: 50W |
| Total harmonic distortion (THD <0.5%) | Low-input/--3dBu 100Hz, 4O |
| Hi-input/-3dBu 15KHz, 8O | |
| S/N Ratiio | Low: >80dBu / Hi: >65dBu |
| SPL@1m | 96dB / 122.1dB (Max) |
| Frequency Response | 65Hz - 20kHz - 6dB |
| Woofer | 2 x 8" 203mm - 1.5" V.C. |
| Driver: | 1" Driver - 1" Voice Coil |
| Horn Coverage: | 50º x 50º |
| Line Input Level: | -5dBu ±1dBu |
| Input Impedance: | Line 15kO input |
| Indicators: | Power & CLIP |
| Power supply: | 110-120V~60Hz / 220-240V~50/60Hz |
| External controls: | Volume, Master switch / AC Select |
| Dimension (cm) | 37.8 x 33.9 x 73.1 |
| Weight (kg) | 20 |
| Model | TPS 18A NEO SUBWOOFER |
| System Type: | Active Subwwofer Speaker Cabinet |
| Power Handling: | 500 Watts |
| Signal/noise ratio: | 0.26% (<0.5%) |
| Rated Input Sensitivity: | 88dBu (>85dBu) |
| Input Resistance: | -1dB |
| Line input: | Combo connector: 0dB / 0.775V |
| Line output: | XLR connector: 0dB / 0.775V |
| Indicator: | Power - Signal - Compressor |
| SPL (1W/1m): | 99dB ±3dB Max SPL: 126dB at 1m |
| Frequency Response: | 35Hz~110Hz -10dB |
| Impedance: | 4O |
| Low frequency: | 18" Subwoofer - 3" Voice Coil |
| Power Supply: | 115V 60Hz / 230V 50Hz Switchable |
| Dimension (cm) | 54 x 53 x 117.8 |
| Weight (kg) | 54 |