FLX3 Line Array System

FLX 3 Array

  • 4000W
System Type 3" 2-way Passive System
Output Power 40W (CONTINUOUS) , 80W (PROGRAM)
Sensitivity (1W/1M) 90dB
Maximum SPL @ 1m 106dB Max. (calculated)
Frequency Response 100Hz-20kHz (-10dB)
Impedance 8 ohms
Transducer Low 2 x 3'' Woofer, 0.75'' (19mm) Voice Coil
Transducer High 3 x Ø13mm Voice Coil Neodymium Tweeter
Crossover Frequency 2.5kHz
Dispersion(-6dB) 100° Horizontal, 30° Vertical (one module)
Attachment Points Adjustable Rigging System, Vertical Splay Adjustable in 1.5° Increments from 0°- 12°
Connectors Parallel or Series Ø6.3mm Socket / Selection Switch
Enclosure Construction Polypropylene Enclosure, steel Metal Grille with foam
Fittings information Steel Stirrup Material, 3 Flying Points
Dimensions (HxWxD) (W) 265mm x (H) 124mm x (D) 195mm; (W) 10.43" x (H) 4.88" x (D) 7.68"
Net Weight 3.2kg / 7.05 lbs
System Type 12" Passive Subwoofer Speaker
Output Power 300W PROGRAM, 125W PEAK
Sensitivity 122dB Continuous / 125dB Peak
Frequency Response 45Hz-2.8kHz (-10dB)
Impedance 4 ohms
Transducer Low 12" (320mm) Ferrite Woofer, 2.55" (64.5mm) Voice Coil
Connector 4 Pin Terminal Block and 2*NL-4 Speakon Parallel Socket
Enclosure Construction Plywood Cabinet, Resistant Black Paint, Metal Grille
Mounting One metal standard Pole-mount
Dimensions (HxWxD) 500 x 350 x 542 mm / 19.69" x 13.78" x 21.34"
Net Weight 20.10kg / 44.31 lbs
Stereo Mode (Both Channels Drive) 4 ohms (RMS) 500W x 4 / 8 ohms (RMS) 250W x 4
Bridge Mono Mode Input Sensitivity (Limit Off) 8 ohms (RMS) 1000W x 2
Input Sensitivity 0.9-1.1V (0+/-1dBv)
Input Impedance 20k ohms balanced or 10k Ohms unbalanced
Frequency Response 20Hz ~ 20KHz (+0/-1dB) (at 10dB Rated Output Power 8 ohms)
Voltage Gain 34+/- 0.5dB
THD+N (Ref.1K 1/8 Rated Power, A-Weighted) <0.15%
S/N rate (Ref. Rated Power, A-Weighted) >95dB
Crosstalk (Below Rated Power) >50dB
Damping Factor (1K 8 ohms) >180
Power Supply Switching Power Class D