| Model |
MXi.6FX |
| Input Channels |
| Mono input channels |
| Microphone input | electronically balanced, discrete input configuration |
| Frequency response | 10 Hz to 55 kHz, +/ 3 dB |
| Distortion (THD & N) | 0.005% at +4 dBu, 1 kHz |
| Gain range | 0 dB to 60 dB (MIC) |
| SNR (Signal to Noise Ratio) | 115 dB |
| Line input | electronically balanced |
| Frequency response | 10 Hz to 55 kHz, +/ 3 dB |
| Distortion (THD & N) | 0.005% at +4 dBu, 1 kHz |
| Stereo input channels |
| Line input | Balanced |
| Frequency response | 10 Hz to 55 kHz, +/- 3 dB |
| Distortion (THD & N) | 0.005% at +4 dBu, 1 kHz | |
| Impedance |
| Microphone Input | 1.4 k Ohms |
| All Other Input | 10k Ohms or Greater |
| Tape Out | 1k Ohms |
| All Other Outputs | 120 Ohms |
|
| Equalization |
| Hi shelving | +/- 15 dB @12 kHz |
| Mid bell | +/- 15 dB @ 2.5 kHz |
| Low shelving | +/- 15 dB @ 80 Hz |
|
| DSP Section |
| A/D and D/A converters | 24-bit |
| DSP resolution | 24-bit |
| Type of effects | Vibraflange, Funky, Rockabilly, Bigstage, Vibrato1-4,Flanger1-4, Chorus1-4 |
| Presets | 16 |
| Controls | 16-position PRESET Selector, FX level, REVERB level, CLIP LED |
|
| Main Mix Section |
| Noise (Bus Noise) | Fader 0dB,Channels muted:-100dBr (ref:+4dBu) |
| Fader 0dB, All Input Channels Assigned and Set To UNITY Gain:-90dBr(ref:+4dBu) |
| Max Output | +22 dBu Unbalanced,1/4' Jacks |
| AUX Sends max out | +22 dBu |
| AUX Returns gain range | 8 to +15 dB | |
| Power Supply(AC/DC Adaptor) |
| Main voltage | USA / Canada 100-120 V~, 60 Hz |
| Fuse | Europe 210-230 V~, 50 Hz, U.K. / Australia 240 V~, 50 Hz |
| Power Consumption | 15 Watts |
|
| Physical |
| Dimension (W D H) | 185 mm x 230 mm x 35/55 mm |
| Net weight | 1.4 Kg (3.09 lb) |
| Shipping weight | 2.7 Kg (5.95 lb) |
|
